Views: 0 Author: Site Editor Publish Time: 2022-07-20 Origin: Site
1.Paper sticking machine's belt length control potentiometer is at zero position. The belt length control potentiometer is on the left side of the front panel switch. Adjusting clockwise, the length of the tape is longer and vice versa; if it is at zero, the tape is not.
2. The wearing stick of the Paper sticking machine is incorrect. Open the right door, follow the instructions of the “Pull-to-wear process” or the wearing belt, and wear the belt correctly.
3. There are foreign objects in the upper and lower extensions of the Paper sticking machine. The packaging machine has been used for a long time, and it has not been cleaned and maintained in time. As a result, the machine has accumulated stolen goods, so that the feeding belt is not smooth and free, and should be cleaned and maintained.
4. The belt gap of the Paper sticking machine is not correct. The gap between the pair of Paper sticking machines and the rollers is critical to the normal feeding. The adjustment of the gaps is described in the instructions. Carefully adjust, adjust to the belt roller gap only when the thickness of the belt is 0.05~1mm.
5. The PP strip selected by the Paper sticking machine is too thick or too thin.
Because there are many manufacturers of PP packing belts, the thickness is also inconsistent, should be selected according to requirements; if it is impossible, please carefully adjust the gap between the feeding and retracting rollers according to the instructions.
6. The electromagnet of the Paper sticking machine is not working properly. The electromagnet does not work. First check if the electromagnet wire bonding head is off, and then check if the coil is burnt out. If there is no abnormality in both, check whether the electromagnet is displaced or blocked by the dirt, so that the bullet can not move freely.
