The Edge Banding Machine's Hydraulic Cylinders Are Available In Single-acting And Double-acting Closed Versions.

The crank-type hydraulic cylinder converts the twisting motion of the hydraulic cylinder into a reciprocating swing through the stalk linkage mechanism. The hydraulic cylinders of this edge banding machine are available in single-acting open and double-acting closed versions.

Heat-to-edge banding machine Single-acting open-type stalk hydraulic cylinder. One end of the cylinder of the edge banding machine must be spliced so that the cylinder axis can swing. The protruding portion of the piston rod is connected to the crank. The other end of the crank is connected to the rotating shaft. When the piston enters the pressure oil in the left chamber, the piston rod pushes the rod to the right to make an arc motion, causing the shaft to generate torque. When returning, the piston is pushed by an external force such as a load.

Thermal-to-edge banding machine Double acting closed crank hydraulic cylinder. This type of cylinder has no wobble axis, so the cylinder can be connected to the external mechanism using a rigid position. However, the piston and connecting rod must be made of dumplings. When the left side enters the cymbal, the crank moves to the right, and the rotating shaft rotates counterclockwise. When the right chamber squats, the stalk moves to the left, and the rotating shaft moves clockwise. The edge banding machine's hydraulic cylinders are easier to control than single-acting hydraulic cylinders, and the edge banding machine is compact and safe to work with, and can also be used to adjust the angle of crank rotation with screws.