The Basic Operation Flow Of The Edge Banding Machine

The edge banding machine is a laboratory device that fills a high-purity inert gas into an edge banding machine and circulates the active material therein. Also known as glove edge banding machine, inert gas protection edge banding machine, dry edge banding machine. The edge banding machine is mainly for the removal of O2, H2O and organic gases.

The basic operation flow of the edge banding machine:

1)Connect inert gas to the air inlet,

2)Connect the mechanical pump to the vacuum port,

3)Check the transition room, the inner door opens and the outer door closes.

4)Close the glove cover,

5)Pump down to -0.1Mp and turn off the vacuum pump.

6)Fill the inert gas to 0Mp and close the intake valve. If there are other devices, it should be turned on in this part to Prepare the environment of the edge banding machine to the required state.

Edge banding machine is widely used in anhydrous, oxygen-free, dust-free ultra-pure environments, such as: lithium-ion batteries and materials, semiconductors, super capacitors, special lamps, laser welding, brazing, etc. Or the cultivation of anaerobic microorganisms, etc. in an anaerobic environment in the field of biological sciences.