Affects the stability of the movement of the Paper Sticking machine hydraulic cylinder.

In the design of the hydraulic system, it is often necessary to determine the working speed of the Paper sticking machine hydraulic cylinder and then determine the required flow rate. It should be noted during design that the rated flow of the Paper sticking machine hydraulic pump should be greater than the flow required by the Paper sticking machine hydraulic cylinder, so as to compensate for the loss caused by the leakage. However, it is also not possible to use a hydraulic pump with an excessive flow rate, which not only speeds up the speed of the hydraulic stick of the Paper sticking machine, but also causes a large amount of oil to be lifted out of the overflow valve during the throttle speed regulation, causing an increase in the parking temperature. The change in parking temperature will affect the stability of the movement of the Paper sticking machine.

In the hydraulic system of the multi-Paper sticking machine hydraulic cylinder, if it is the version movement, the hydraulic stick rated flow plate should be selected according to the Paper sticking machine hydraulic cylinder with the largest required flow rate. If multiple cylinders are moving at the same time, the hydraulic pump's recommended flow rate should be greater than the sum of the required flow rates of the simultaneously moving Paper sticking machine hydraulic cylinders.